AM 151 is a natural stone protecting coating producing a shiny surface; an acrylic based product that withstands UV rays and has strong bonding ability, giving maximum protection to the surface of natural stones. AM 151 is used for protecting natural stones from damage caused by fungus, moss and weather, retaining the beauty of the stone’s natural texture.
AM 151 gives a shiny end result, exposing the stone’s veins, adding to their beauty.
Has strong bonding capability, making the coating long lasting.
AM 151 withstands UV rays.
AM 151 performs a water repellant film preventing water from seeping into the stone pores, preventing growth of fungus and moss.
Exterior and Interior.
Walls and Roofs.
1. PREPARATION STAGE
The surface must be dry, clean and free from fungus, moss, oil, dust and other dirt materials.
2. APPLICATION STAGE
Brush AM 151 on the application surface until well covered.
Apply the second layer after the first layer dries (around 2 hours at room temperature).
Keep the surface away from water during the application process and until 2 hours after finishing.
Ready to use, does not require mixing with thinner, resulting lower cost.
AM 151 is an instant use product, does not require mixing with other materials.
Do not apply on wet surfaces.
Do not clean the surface with coarse brush, just spray with water.
0,91 +/- 0,01
2 times application = 5 - 6 m2 / litre (depending on the porosity of the surface to be coated)
1 ltr Can
2,5 ltr Gallon
36 months in closed condition, dry location at room temperature.