Lightweight brick adhesive based cement, silica sand and additives are reinforced with POLYMERIC BINDER ™ so it has strong adhesion and durability. Solutions for lightweight and economical brick installation.
Power is strong.
Glue is perfect.
Easy to use.
Efficient use of materials.
Exterior and Interior.
1. PREPARATION STAGE
Clean the application area from dust, paint, oil, grease and other impurities.
2. MIXING STAGE
Comparison of clean water: AM 48 Powder = 1 part: 3 parts.
Pour 3 parts AM 48 Powder bit by bit into a mixing container that already contains 1 part clean water while stirring with a spoon of cement.
Continue stirring with the mixer evenly until the mixture is paste-shaped.
Allow to stir for 5 minutes for all components to react perfectly.
3. APPLICATION STAGE
Repeat stirring with a cement spoon, then apply it to the application area.
Flatten the mixture in the application field using the trowel, the selected trowel width adjusted to the width of the lightweight brick.
Immediately set lightweight brick over the wet layer of the mortar, tap with a rubber hammer to stick well.
Recommended adhesive thickness is 3mm.
Use clean water for lightweight brick adhesive mixing.
Store in a sealed pack and in a dry place.
BULK DENSITY (KG/LTR)
1,5 +/- 0,1 (bulk density)
PRODUCT QUALITY CONTROL
(27°C; 70% RH)
Initial Setting: 24 hours
Pot Life: 60 minutes
Full cure: 28 day
Thickness 10 cm : 3,5 - 4 kg /m2
Thickness 7,5 cm : 2,2 - 2,5 kg / m2
40 Kg Sack
12 month in closed condition, dry location at room temperature.