Is a specially designed joint filler suitable for all types of tiles on floors and walls. In powder form with special composition, when mixed with water will produce a strong bonding and long lasting joint filler.
Wide range of colors.
Long lasting, color-fast.
Easy to clean.
Exterior and Interior.
Dry and Wet.
Floors and Walls.
TYPES OF TILES
Homogeneous Tiles (water absorbency < 0,5 %).
Ceramic Tiles (water absorbency > 6%).
Marble and Granite.
1. PREPARATION STAGE
Application of joint filler should be done after the cement / tile adhesive is dry, in accordance with instructions for each product (minimum 24 hours).
Excessive cement / tile adhesive at the joints should be cleaned.
Make sure the tile joints are clean free of dust.
Moisten the joints with a wet sponge/cloth before application (especially for porous tiles or in hot areas).
2. MIXING STAGE
Mixing ratio :
- Weight = 330 ml water: 1 kg AM 53 Powder
- Volume = 1 part water: 2.5 parts AM 53 Powder
Excess water composition can make the nat become brittle.
Pour 2.5 parts of AM 50 Powder slightly into a mixing container that already contains 1 part of clean water while stirring with a cement spoon.
Continue stirring evenly until the mixture is paste-shaped.
Allow 5 minutes for all components to react perfectly.
3. APPLICATION STAGE
Repeat mixing to a paste before application.
Fill the joints using a clean rubber trowel, applying diagonally Make sure the joints are firmly filled and smooth.
Clean remaining joint filler from the tile surface, do not re-use.
In half-dry condition, press the joint filler with a joint leveller to obtain a strong and perfect joint.
To increase bonding strength of joint filler in wet conditions or submergend areas, it is recommended to use AM 54 - Joint Filler Strengthening Liquid in place of water in mixing the joint filler.
For best results in water tanks or pools, wait 7 (seven) days after applying before filling with water.
It is recommended to prepare an amoun of mixture, just enough forapplying within 40 - 50 minutes.
Cleaning should be done soon after applying (10 – 20 minutes), before excessive filler dries on the tile surface.
Do not wet tiles during the drying process Floors can be stepped on after 24 hours.
Do not use tile cleaners with high acidity.
1,0 - 4,0 mm
BULK DENSITY (kg/ltr)
1,3 +/- 0,1 (bulk density)
PRODUCT QUALITY CONTROL
(27°C; 70% RH)
Grouting time : 24 hours after tiles are laid
Pot life : 60 minutes
Cleaning time : 20 minutes
Full cure : 28 days
MATERIAL ESTIMATE (m2/kg)
TILE DIMENSION (cm)
Silt width grout (mm) 1
Silt width grout (mm) 2
Silt width grout (mm) 3
Silt width grout (mm) 4
10 - 12
8 - 10
4 - 5
2 - 3
15 - 20
12 - 14
6 - 7
4 - 5
30 - 35
15 - 20
8 - 10
6 - 8
1 kg Bag
12 months in closed condition, dry location at room temperature.