Epoxy based three component grout filler that has strong adhesion, waterproof and chemical resistance. Contains Microban® anti-microbial ingredients to prevent the growth of mold (grout) on the grout surface permanently. It is suitable for laboratory, hospital, factory, bathroom, swimming pool, water container and kitchen.
Does not absorb dirt.
Not easily eroded.
Hold mushrooms and mildew.
Dry, wet and submerged.
Floors and Walls.
TYPES OF TILES
Homogeneous Tiles (water absorbency < 0,5 %).
Ceramic Tiles (water absorbency > 6%).
Marble and Granite.
1. PREPARATION STAGE
Application of joint filler should be done after the cement / tile adhesive is dry, in accordance with instructions for each product (minimum 24 hours).
Excessive cement / tile adhesive at the joints should be cleaned.
Make sure the tile joints are clean free of dust.
Moisten the joints with a wet sponge/cloth before application (especially for porous tiles or in hot areas).
2. MIXING STAGE
Pour Liquid Part A and Part B into a mixing container. Stir until blended.
Part C Powder Pour slowly into a mixing container that has contained a mixture of Part A andPart B.
Mix well to form a paste.
3. APPLICATION STAGE
Fill gap with grout pasta AM 55 using clean rubber Trowel with diagonal direction. Make sure the grout gap filled with dense and flat.
Clean residual grout filler found on the surface of the tiles using a sponge or damp cloth.
Let it dry for 24 hours is perfect
For applications in ponds and water bath, it is recommended to wait seven days prior to filling the water.
It is advisable to make a slurry sufficiently, so that each mixture is used up within 40-50 minutes.
During the drying process should not be exposed to water and should not be touched / trampled.
Part A = Hardener
Part B = Resin
Part C = Filler
1,0 - 6,0 mm
BULK DENSITY (kg/ltr)
Part A = 0,11
Part B = 0,22
Part C = 0,67
PRODUCT QUALITY CONTROL
(27 - 30°C; 70% RH)
Grouting time : 24 after tiles are laid
Pot life : 60 minutes
Cleaning time : 20 minutes
Full cure : 28 days
MATERIAL ESTIMATE (m2/set)
TILE DIMENSION (cm)
Slit width grout (mm) 1
Slit width grout (mm) 2
Slit width grout (mm) 3
Slit width grout (mm) 4
30x30 - 40x40
Box : 1 kg set
Pail : 4,5 kg set
12 months in closed condition, dry location at room temperature.