Change language:

AMBPI PRODUCTS

AM 80 PLASTER

AM 80
PLASTER

AM 80 plaster is a mixture of cement, sand and additives that can be applied directly to the addition of water for the plastering work of walls, ceilings or other structures to form a hard and flat surface.


ADVANTAGES

  • Practical.
  • Easy application.
  • Power is strong.
  • Prevent cracking of hair.
  • Work faster.

APPLICATION AREA

  • Interior.
  • Dry and Wet.
  • Walls, Columns, and Ceiling.

1. PREPARATION STAGE

  • Clean the surface of the brick / AAC or concrete to be plastered from dust, oil, grease and dirt.
  • Flush the surface to be plastered with clean water.

2. APPLICATION STAGE

  • Enter into a bucket containing 6.5 - 7 liters of water pour 40 kg of plaster, mix well until it gets a mortar shaped pasta.
  • Allow 5 minutes for the additive to react perfectly.
  • Mix well back before mixture is applied.
  • Recommended application thickness is about 10 mm.
  • Apply plaster by throwing plaster on the surface using a cement spoon, plaster mixture will stick to the surface.
  • Flatten the surface of the plaster by using a flat-edged trowel, for large areas should be leveled with a straight iron / aluminum bar.
  • If there is an uneven surface, apply a patch / fireplace when plastering is still wet, tidy up immediately so that the connection is not visible.
  • Allow the plaster to dry.
  • Surface plaster can diaci after aged over 7 days.

TECHNICAL DATA

PRODUCT IDENTITY AM 80
SUBSTANCE Powder
COLOR Grey
BULK DENSITY (KG/LTR) 1,65 +/- 0,05 (bulk density)
1,73 +/- 0,05 (bulk density)
ADHESION TO SCREED 0,1 - 0,2 N/mm2
FUNCTION To coat the surface:
  1. Red brick
  2. Lightweight Brick (AAC)
  3. Concrete
POWER SPEAD 2 - 2,4 m2 / 40 kg
PRODUCT PACKAGING 40 kg Sack
SHELF LIFE 6 months in packs that are still sealed and sealed, kept in a dry place.

RELATED PRODUCT

CALCULATE YOUR
BUILDING NEEDS