AM 86 is a premium skimcoat surface finisher used to obtain a smooth layer on the surface of concrete or plaster, and serves as a base before painting or attaching wallpaper.
AM 86 is an instant-use mixture, comprising basic materials of cement, filler, additive and strengthened with POLYMERIC BINDER™, producing a smooth layer of surface finish, non-cracking, not easy to peel off, and long lasting.
Strong bonding ability, resistant to peeling.
Prevents hairline cracking caused by extreme shrinkage.
It has low porosity and low alkali content, facilitating the process of painting and economic use of paint.
Produces smooth end result, allowing surface to be painted directly with no base paint or putty.
Dries completely within only 7 days, surface can directly be painted, saving labour time.
Exterior and Interior.
Walls and Ceiling.
1. PREPARATION STAGE
llow plastered area to dry fully.
Surfaces with holes should be filled by plastering.
Application area should be dry, clean and free of oil, fats, moss and fungus, granules that can easily loosen, and other dirts.
Moisten the surface with clean water, preventing the substrate from absorbing water from the newly spread layer. This ensures an ideal drying process, the finish layer will have strong bonding ability and crack resistance.
2. MIXING STAGE
Clean water AM 86 Powder mixing ratio = 1,75 lt : 5 kg
7 lt : 20 kg; 14 lt : 40 kg
Mix thoroughly to a paste.
Leave for 5 minutes to allow full activation of the polymer and addtive.
3. APPLICATION STAGE
Repeat mixing to a paste before application.
Spread AM 86 on the surface using a currycomb.
Smoothen and finish the application using cement / paper / sponge / styrofoam.
Use clean water when mixing skimcoat.
Keep the product tightly closed in a dry place.
BULK DENSITY (KG/LTR)
1,05 + 0,05 (bulk density)
(27°C; 70% RH)
Pot Life: 60 minutes
Curing time : 24 hours
Full cure: 28 days
2 - 2,5 m2/ 5 kg
8 - 10 m2/20 kg
16 - 20 m2/40 kg
5 kg Bag
20 kg Sack
40 kg Sack
12 months in closed condition, dry location at room temperatue.