AM 87 is a premium white acian based cement, filler, additive, and reinforced with POLYMERIC BINDER ™ to produce a smooth, non-cracked, smooth and durable layer of acian. AM 87 is a ready-mixed mixture, serving as a layer that smoothes and smooths the surface of concrete or plaster, and is the initial layer before the stage of painting or wallpaper installation.
Strong bonding ability, resistant to peeling.
Prevents hairline cracking caused by extreme shrinkage.
Making process easy
Produces smooth end result, allowing surface to be painted directly with no base paint or putty.
Dries completely within only 7 days, surface can directly be painted.
Exterior and Interior.
Walls and Ceiling.
1. PREPARATION STAGE
Allow plastered area to dry fully.
Surfaces with holes should be filled by plastering.
Application area should be dry, clean and free of oil, fats, moss and fungus, granules that can easily loosen, and other dirts.
Moisten the surface with clean water, preventing the substrate from absorbing water from the newly spread layer. This ensures an ideal drying process, the finish layer will
have strong bonding ability and crack resistance.
2. MIXING STAGE
Clean water AM 87 Powder mixing ratio = 1,75 lt : 5 kg; 7 lt : 20 kg; 14 lt : 40 kg.
Mix thoroughly to a paste.
Leave for 5 minutes to allow full activation of the polymer and addtive.
3. APPLICATION STAGE
Repeat mixing to a paste before application.
Spread AM 87 on the surface using a currycomb.
Smoothen and finish the application using cement / paper / sponge / styrofoam.
Painting can be done after 7 days.
Use clean water when mixing skimcoat.
Keep the product tightly closed in a dry place.
BULK DENSITY (KG/LTR)
1,09 + 0,05 (bulk density)
(27°C; 70% RH)
Pot Life: 60 minutes
Curing time: 24 hours
Full cure: 28 days
2 - 2,5 m2/ 5 kg
8 - 10 m2/20 kg
16 - 20 m2/40 kg
5 kg Bag
20 kg Sack
40 kg Sack
12 months in closed condition, dry location at room temperature.