AM 30
Extra Strong Tile Adhesive
Two-component tile adhesive is suitable for all types of tiles (except plastic tiles). It can be used for areas with high-pressure conditions such as basements, swimming pools, large-capacity water reservoirs, car parks, pedestrians, etc.
Product excellence :
+ Extra strong adhesion
+ Suitable for large tiles
+ Prevents empty tiles
+ The mixture does not dry quickly
Packaging: 5 kgset, 50 kgset & 100 kgset
- Interior & exterior
- Dry, wet & submerged areas
- Floor & wall
- Heavy load traffic area
- Must use AM 30 powder and liquid according to the mixing ratio; other ingredients must not replace it.
- Do not add other ingredients to the product.
- Open time is longer (30 minutes), making installing large tiles easier.
- Make enough mixture to use up (pot life) within 60 minutes.
- Install the tiles one by one. It is not recommended to apply the entire adhesive firstly because it is most likely to dry quickly and decreases the adhesive power.
- Add adhesive for tiles >60x60cm and tiles with uneven backing by smearing the back of the tile (back-buttering) so that the tile adheres perfectly.
- Use a trowel to save on tile adhesive and prevent tile popping.
- The area of ​​application to which the tiles (plaster or screed) will be applied is at least 7 days old.
- Store the product in a dry place and avoid direct sunlight.
