AM 49
Swimming Pool Ceramic Adhesive
Ready-to-use ceramic adhesive that is resistant to pressure and long-term water immersion, such as in swimming pools, water tanks, etc
Product excellence :
- Water pressure resistant
- Strong adhesive
- Not fast dry
Packaging: 25 kg
- Interior & exterior
- Wet & submerged areas
- Floor & wall
- Do not add other ingredients to the product.
- Use clean water according to the mixing ratio.
- Make enough mix to use up (pot life) within 60 minutes.
- Install the tiles one by one. It is not recommended to apply all the adhesive first, it is feared that the adhesive will dry quickly, so that the adhesive power will decrease.
- For tiles measuring 60x60cm and tiles with an uneven back, add adhesive by smearing the back of the tile (back-buttering) so that the tile is installed perfectly.
- Use a trowel to save on tile adhesive and prevent tiles from popping.
- The application area to which the tiles (plaster or screed) will be pasted is at least 7 days old.
- Store the product in a dry place and avoid direct sunlight.
Spread Power
Ceramic Size
≤ 20×20 : 5 kg/m² ( 5m2/sack)
30×30 – 40×40 : 6 – 7 kg/m² (4 m2/sack)
≥ 60×60 : 8 – 11 kg/m² (2.5 m2/sack)
